export const metadata = {
    title: "仮置き場",
    description: "仮置き場",
    datetime: "2025/11/06",
};

```sh
# 1. プライベートIPアドレスのフィルター
set policy prefix-list6 BGP-IN rule 10 action 'permit'
set policy prefix-list6 BGP-IN rule 10 prefix '3ffe::/16'
set policy prefix-list6 BGP-IN rule 10 le 128
set policy prefix-list6 BGP-IN rule 20 action 'permit'
set policy prefix-list6 BGP-IN rule 20 prefix '2001:db8::/32'
set policy prefix-list6 BGP-IN rule 20 le 128
set policy prefix-list6 BGP-IN rule 30 action 'permit'
set policy prefix-list6 BGP-IN rule 30 prefix 'fe00::/8'
set policy prefix-list6 BGP-IN rule 30 le 128
set policy prefix-list6 BGP-IN rule 40 action 'permit'
set policy prefix-list6 BGP-IN rule 40 prefix '::/0'
set policy prefix-list6 BGP-IN rule 40 le 15
set policy prefix-list6 BGP-IN rule 50 action 'permit'
set policy prefix-list6 BGP-IN rule 50 prefix '::/128'
set policy prefix-list6 BGP-IN rule 50 ge 128

## 2. 1.のフィルターを通して、問題なかったものを許可する場所
set policy route-map BGP-IN rule 10 action 'deny'
set policy route-map BGP-IN rule 10 match ipv6 address prefix-list 'BGP-IN'
set policy route-map BGP-IN rule 20 action 'permit'

## 3. 広報するIP
## `annouce-ip`: 広報する予定のIP
set protocols static route6 <annouce-ip> blackhole distance '254'

## 4. BGP接続設定(upstream用)
## `my-asn`: 自分のASN
## `neighbor-asn`: 相手のASN
## `neighbor-ip`: 相手の境界IP
## `my-border-ip`: 自分の境界IP
## `annouce-ip`: 広報する予定のIP
## `router-id`: ルーターID
set protocols bgp system-as <my-asn>
set protocols bgp neighbor <neighbor-ip> remote-as <neighbor-asn>
set protocols bgp neighbor <neighbor-ip> update-source <my-border-ip>
set protocols bgp neighbor <neighbor-ip> address-family ipv6-unicast route-map import 'BGP-IN'
set protocols bgp neighbor <neighbor-ip> address-family ipv6-unicast
set protocols bgp address-family ipv6-unicast network <annouce-ip>
set protocols bgp parameters router-id <router-id>

## 5. BGP接続設定(ほかの自分のBGPルーター)
## 冗長化をする場合、この設定をいれるといいでしょう。
## `my-asn`: 自分のASN
## `neighbor-ip`: 他ルーターIP
## `my-border-ip`: 自分のルーターIP
set protocols bgp neighbor <neighbor-ip> remote-as <my-asn>
set protocols bgp neighbor <neighbor-ip> update-source <my-border-ip>
set protocols bgp neighbor <neighbor-ip> address-family ipv6-unicast

## 6. IPの設定
## `router-ip`: ルーターIP(prefixは/128)
set interfaces lo lo address <router-ip>

## 7. OSPFの設定
## 予期せぬ事態にEthernetがダウンしたときに備えて、
## 5.のiBGPの`my-border-ip`は6.で設定したアドレスを使いましょう。
## `interface`: ほかのルーターに接続されているL2SW
## `rid`: 4.で設定した`router-id`を設定してあげてください
set protocols ospfv3 interface <interface> area 0.0.0.0
set protocols ospfv3 interface lo area 0.0.0.0
set protocols ospfv3 interface lo passive
set protocols ospfv3 parameters router-id <rid>
set protocols ospfv3 redistribute static
set protocols ospfv3 default-information originate
```